How to adjust the pressure of diesel pump? Analysis of popular technologies on the entire network in the past 10 days
Recently, the issue of diesel pump pressure regulation has become a hot topic in the auto repair industry. This article will combine the hot contents of the entire network for the past 10 days to analyze in detail the methods, common problems and solutions for diesel pump pressure.
1. The importance of diesel pump pressure regulation
The diesel pump pressure directly affects the performance of the engine. Too low pressure will lead to insufficient power and difficulty in starting; too high pressure may damage components such as fuel injectors. According to the maintenance forum data, pressure problems account for as high as 42% of the consultations on diesel pumps in the past 10 days.
| Pressure range (bar) | Engine performance | Risk warning |
|---|---|---|
| 100-150 | Normal operation | Best working area |
| ＜100 | Power drop | Accelerate wear |
| ＞180 | Increased noise | Possible damage to parts |
2. Detailed explanation of the adjustment steps
1.Preparation: Make sure the engine is cooled and prepare pressure gauge, wrench and other tools
2.Connect the pressure gauge: Connect the special pressure gauge to the high-pressure oil pipe test port
3.Start detection: Record the initial pressure value in idle state
4.Adjustment method: Find the pump body adjustment screw, increase the pressure clockwise, and reduce the pressure counterclockwise
| Engine Type | Standard pressure value (bar) | Allowable deviation |
|---|---|---|
| Ordinary diesel engine | 130-150 | ±10 |
| High voltage common rail | 160-180 | ±5 |
| Turbocharged | 140-160 | ±8 |
3. Summary of recent FAQs
According to the data statistics of the repair forum in the past 10 days, the following problems are the most prominent:
1.Unstable pressure: 37%, mostly due to blockage of fuel filter or air intake problems
2.Unable to build up stress: accounts for 29%, which is commonly seen in seal aging
3.Ineffective adjustment: 18%, the pressure regulating valve may need to be replaced
| Fault phenomenon | Possible Causes | Solution |
|---|---|---|
| High pressure fluctuations | Fuel water/bubble | Empty fuel system |
| The pressure continues to drop | Plunger wear | Replace plunger assembly |
| Regulate without response | The regulating valve is stuck | Clean or replace valves |
4. Latest maintenance technology trends
1.Intelligent diagnostic equipment: Nearly 60% of professional repair stations start using digital pressure analyzers
2.Noninvasive detection: New ultrasonic detection technology can reduce disassembly and assembly time by one quarter
3.Preventive maintenance: According to big data, pressure detection is recommended for every 20,000 kilometers
5. Things to note
1. The engine must be in a shutdown state during adjustment
2. The adjustment range should not exceed 5 bar each time
3. After completing the adjustment, it takes 10 minutes to test the operation.
4. The pressure value should be appropriately increased in winter (about 5-8bar)
According to recent feedback from users, correctly adjusting the diesel pump pressure can improve fuel economy by about 6-8%, while reducing emissions by about 15%. It is recommended to check the pressure value every 3 months or 10,000 kilometers to ensure that the engine is always in optimal working condition.
check the details
check the details
en
