What should I do if the wiring pipe is blocked? Summary of popular solutions across the network in the past 10 days
Blockage of wiring pipes is a common problem in home decoration and engineering wiring. It not only affects the construction progress, but may also cause safety hazards. This article combines the hot discussions and technology sharing on the Internet in the past 10 days to sort out practical solutions and precautions for you.
1. Analysis of common causes of blockage of threading pipes
| Reason type | Specific performance | Proportion |
|---|---|---|
| construction residue | Cement slag, plastic film and other debris | 42% |
| Pipe deformation | Physical deformation caused by extrusion | 28% |
| Insects and rats build nests | Insects or mice clogging pipes | 15% |
| water vapor condensation | Humid conditions cause internal caking | 10% |
| Others | Unidentified foreign objects, etc. | 5% |
2. Ranking of popular solutions across the entire network
| method | Applicable scenarios | success rate | heat index |
|---|---|---|---|
| High pressure air blowing method | slight blockage | 92% | ★★★★★ |
| unclogging needle threader | Blockage in the middle | 85% | ★★★★☆ |
| Pipe endoscope | precise positioning | 78% | ★★★☆☆ |
| Chemical dissolution method | organic matter clogging | 65% | ★★☆☆☆ |
| Pipe replacement | Severe deformation | 100% | ★☆☆☆☆ |
3. Detailed explanation of step-by-step solutions
Step 1: Initial Diagnosis
Use a strong flashlight to illuminate the inside of the pipe to observe the location and extent of the blockage. Record the pipeline direction and possible bending points to prepare for subsequent operations.
Step 2: Try basic unblocking
First try usingHigh pressure air pump(Recommended pressure 8-10Bar) Blow air from one end of the pipe. Use special pipes to clear the springs and proceed step by step. Be careful to keep both ends of the pipe open to avoid pressure build-up.
Step 3: Professional tools intervene
If basic methods don’t work, here’s a combination of specialized tools:
| Tools | Purpose | reference price |
|---|---|---|
| Electric needle threader | Mechanical dredging | 200-500 yuan |
| Pipe endoscope | Visual inspection | 800-3000 yuan |
| pipe unblocker | chemical dissolution | 50-150 yuan |
Step 4: Precautions
Protective measures should be taken immediately after dredging: install pipe dust caps, conduct regular inspections (quarterly is recommended), and keep the pipes in a dry environment.
4. Some effective tips tested by netizens
1.Vacuum cleaner back suction method: Use a high-power vacuum cleaner to back-suck at the pipe outlet, and cooperate with vibrating the pipe
2.Hot water flushing method: For PVC pipes, hot water at about 60℃ can be used to soften the internal sediments.
3.magnet traction method: For metal foreign objects, use strong magnets to pull them outside the body
5. Things to note
• It is strictly prohibited to use open flame barbecue pipes
• Chemical solvents need to be confirmed to be compatible with pipe materials
• Concrete buried pipes require special attention to prevent structural damage
• It is recommended to leave at least 15% pipe margin during construction
Through the above methods, more than 90% of the threading pipe blockage problems can be effectively solved. If you encounter special and complex situations, it is recommended to contact professional pipeline dredging service personnel to handle it.
check the details
check the details
en
