Welcome to visit Silver edge!
Current location:front page >> mechanical

What to do if there are trachoma in the radiator

2025-12-21 13:13:25 mechanical

What should I do if there are trachoma in the radiator? Comprehensive analysis of causes and solutions

With the arrival of the winter heating season, the use of radiators has become a hot topic recently. According to the data monitoring of the entire network in the past 10 days, the search volume of keywords such as "radiator leakage" and "radiator repair" increased by 35% month-on-month. The following are detailed solutions to the problem of blisters in radiators.

Question typeProportionHigh incidence period
Trachoma leakage42%Initial stage of heating
The interface is loose28%When the temperature changes suddenly
Valve failure18%Continuous use period
Other questions12%irregularly

1. Analysis of the causes of trachoma formation

What to do if there are trachoma in the radiator

1.Material problem: The probability of developing blisters in cast iron radiators after being used for more than 5 years is 67%

2.water corrosion: Water quality with a pH value exceeding the standard will accelerate metal corrosion.

3.pressure fluctuations: System pressure exceeding 0.8MPa can easily cause perforation at weak points

Radiator typeaverage life spanProbability of trachoma
cast iron radiator15-20 years38%
Steel radiator10-15 years22%
Copper aluminum composite20-25 years9%

2. Emergency treatment plan

1.Temporary plugging method:

• Use special sealing glue (temperature resistant above 120℃)

• Soap + raw tape can be used for temporary sealing in case of emergency

• Close the corresponding circuit valve to reduce the water pressure

2.Professional maintenance solutions:

How to fix itApplicable situationsmaintenance time
Welding repairsingle point trachoma3-5 years
Replace film setmultiple trachomaMore than 10 years
Whole replacementUsed for more than 8 yearsMore than 15 years

3. Suggestions on preventive measures

1.Annual maintenance: System testing should be carried out before and after the heating season

2.water quality treatment: It is recommended to install water softening equipment (hardness ≤200mg/L)

3.pressure monitoring: Keep the system pressure within the range of 0.4-0.6MPa

maintenance itemscyclecost
Pipe cleaning2 years/time200-400 yuan
Pressure detectionevery yearfree
Anti-corrosion treatment3 years/time150-300 yuan

4. User FAQs

Q: Will water leakage from trachoma cause immediate danger?

A: Small trachoma leakage is a common problem, but it needs to be dealt with within 24 hours to avoid further damage.

Q: What should I do if I find water leakage at night?

A: Close the water distributor valve immediately, use a container to collect the water, and contact professional maintenance the next day.

Q: How long will it last after repairing?

A: Welding repairs usually last about 3 years. It is recommended that old radiators (more than 10 years old) consider replacing them.

5. Maintenance cost reference

Servicesprice rangeWarranty period
Single point welding80-150 yuan1 year
Replace single group300-600 yuan3 years
Whole house replacement2000-5000 yuan5 years

Recent data shows that the peak demand for radiator repairs is concentrated from mid-November to early December, and users are advised to conduct inspections in advance. When choosing maintenance services, be sure to confirm that the service provider has special equipment maintenance qualifications to ensure construction safety.

Next article
  • What does camera focal length mean?In the field of photography and videography, focal length is a very important concept, which directly affects the angle of view, depth of field and imaging effect of the picture. Whether it is a mobile phone camera, a SLR camera or a surveillance device, the choice of focal length will have a significant impact on the final image. This article will explain in detail the meaning of c
    2026-01-27 mechanical
  • What does FRD mean?Recently, the term "FRD" has appeared frequently in social media and online discussions, becoming one of the hot topics. Many netizens are curious about its meaning and usage. This article will analyze the definition, origin, usage scenarios and related hot data of "FRD" to help readers fully understand this Internet buzzword.1. Definition and origin of FRD"FRD" is the abbreviation of "Fast Respons
    2026-01-25 mechanical
  • What does voltage and current mean?Voltage and current are two very common physical concepts in daily life and technology. They are closely related to power systems, electronic devices, and energy utilization. This article will explain the meaning of voltage and current in detail, and use structured data to display hot topics and hot content in the past 10 days to help readers better understand these two concepts.1.
    2026-01-22 mechanical
  • What is right angle measurementCartesian measurement is a basic technique commonly used in geometry and engineering to determine whether two line segments or planes are perpendicular (i.e., the angle between them is 90 degrees). It is widely used in construction, mechanical processing, surveying and mapping and other fields. This article will combine recent hot topics and demonstrate the principles, tools and practic
    2026-01-20 mechanical
Recommended articles
Reading rankings
Friendly links
Dividing line